AKG C480B

AKG C480B AKG C480B Description: The C 480 B is part of a system designed specifically for excellent audio quality and maximum flexibility. Its electronic circuitry coupled to a transformerless output stage assures completely linear transfer characteristics across the entire audio bandwidth, while achieving self-noise figures close to the theoretical minimum. This, in combination with a typical SPL handling capability of 140 dB broadband means a dynamic range exceeding 125 dB, making the system suitable for the most critical digital recording applications. Gold plated switch and connector contacts guarantee consistent performance. A specially designed output stage drives difficult loads (e.g. excessively long cables) with no signal degradation. Two sets of switches offer a two-step highpass filter, and two gain manipulation stages of either -10 dB or +6 dB. Choice of various capsules: CK 61-ULS, CK 62-ULS, CK 63-ULS, CK 69-ULS AKG C480B Features: Ultra low-noise preamplifier Three selectable gain settings: 0, +6, -10 dB High headroom AKG C480B Specifications: Polar pattern 10 to 30, 000 Hz Preattenuation pad +6, 0, -10 dB, selectable Bass filter 12 dB/octave at 70 or 150 Hz Impedance Recommended load impedance >2000 ohms/1000 pF Supply voltage 48 V phantom power to DIN 45596 Current consumption Connector 3-pin XLR Finish matte black Net weight 115 g / 4 oz. Shipping weight 450 g / 1 lb. Microphone preamplifier for the ULS modular studio condenser microphone system from AKG. All electrical parameters of the preamplifier shall be maximally linear and its gain shall be switchable on the microphone to +6, 0, or -10 dB. Frequency range: 10-30, 000 Hz; electrical impedance: The case shall be no larger than 21 mm (0.8 in.) in diameter and 150 mm (6 in.) long. The maximum net weight of the preamplifier shall be 115 g (4 oz.). Get your AKG C480B today!